PN25 High Pressure Handle Wafer Floating Ball Valve

PN25 High Pressure Handle Wafer Floating Ball Valve PTFE PPL Seat

General Features

Italy Ball Valve

Applicable Standards:
- Design and Manufacturing : GB / T12237 / 1989

- Connection : JB / T79

- Fireproof Test: GB / T13927 - 1992

Size Range:

- DN15 ~ DN200

Nominal Pressure:
- Contruction 1.6 ~ 4.0 MPa
Temperature Limit:
- 20 °C ~ 350 °C

Floating

Full Port

End Entry

Wafer Type ball valves (or called “Italy Super Thin” Type ball valves) are used in the pipeline equipment in the condition of PN1.0~2.5MPa, working temperature of 29~180℃(sealing ring is RPTFE) or 29~180℃(sealing ring is PPL Polyphenylene), to achieve to cut off or connect the medium in the pipeline. The applicable medium, such as water, steamer, oil, Nitric Acid, Acetic Acid, Carbamide, or medium of oxidizability can be applied subject to difference valve material adopted.

Application

Wafer Ball Valve can be widely used in petroleum, chemical, metallurgy, power station, light industry and other fields to automatically adjust or cut off oil, water, gas and pulp or fibrous fluid.

Strength

1. Compared with normal ball valves, super thin type ball valves has the advantage of short structure length, in light weight, easier for installation, and save material etc, and with excellent heat insulation performance.
2. We use flexible sealing structure for the seat ring to achieve the results of high reliable sealing performance and easily for open/close operation, and a special fire-resistant protective structure is set in the valve to keep the valves operation and high sealing performance not affected under the condition of an accident fire risk.
3. Antistatic structure can be set subject to the customer’s request. We set a 90o open/close locating plate with hole, customer can lock the location as per actual condition to avoid mis-operation.

Model Selection

Wafer ball valve

flange end ball valve

ss flanged ball valve

PN25 High Pressure Handle Wafer Floating Ball Valve Images